Switching and dimming light bulbs, HV halogen lamps, electronic transformers for halogen or LED lights, dimmable inductive transformers for halogen or LED lights, HV LED or compact fluorescent lamps.
Operation is via mechanical button (NO contact), System 3000 2- or 3-wire auxiliary unit or System 2000 2-wire auxiliary unit.
Automatic or manual setting of dimming principle according to load (leading or trailing edge).
Display of the selected operating mode using LED.
Switch-on function that preserves the life of the lamp.
Switch-on brightness can be saved permanently (possible with System 2000 and 3000 auxiliary unit).
Switch on with the last brightness set, or a saved switch-on brightness.
Minimum brightness can be set.
Electronic short-circuit protection.
Electronic excess-temperature protection.
Operation with neutral conductor connection.
Technical data
Rated voltage
AC 230 V, 50/60 Hz
Standby
0.3 W
Connected load at 45 °C
HV LED lamps (leading edge)
typically 3 to 100 W
HV LED lamps (trailing edge)
typically 3 to 400 W
Compact fluorescent lamp
typically 3 to 100 W
Light bulbs
20 to 420 W
HV halogen lamps
20 to 420 W
Tronic transformers
20 to 420 W
Electronic transformer with LV LED (leading edge)
typically 20 to 100 W
Electronic transformer with LV LED (trailing edge)
typically 20 to 200 W
Wound electronic transformer
20 to 420 VA
Wound transformer with NV-LED
typically 20 to 100 VA
Auxiliary units
Non-illuminated mechanical push buttons
unlimited
2-wire auxiliary insert
unlimited
3-wire auxiliary insert
max. 10
Cable length
Load
Max. 100 m
Auxiliary unit
Max. 100 m
Ambient temperature
-5 °C to +45 °C
Notes
If the ambient temperature is higher than 45 °C, the connected load must be reduced.